OCTAGON & HEXAGON Candle MOLDS
- Durable Metal Molds - last a very long time with reasonable care.
- All include: wick holder bar, wick retainer screw, mold sealer, 3 feet of wick, and instructions.
- Made with seam in corner for minimal trimming / polishing.
- Usage Tips:
- Do not drop, pry, scratch or dent.
- Placing in a water bath improves finish on candles.
- Dry thoroughly after use to prevent rusting.
- Spray with silicone before storing to prevent rusting.
- Store in sealed container or upside down to keep out dust.
- If candle gets stuck in mold, place in freezer for a few minutes. If it still won't come out, place it in hot water (this ruins finish on candle, and should be considered a last resort). Never try to pry or carve stuck wax from mold - this will almost always ruin the mold.
- Molds may have sharp edges - handle with care.
Wax weights shown are approximate.
| HEXAGON | ||
|---|---|---|
| WIDTH | HEIGHT | |
| 2 3/4" # M122865 |
6 1/2" | |
| 6" 3 wick holes # M122645 |
4 1/2" | |
| OCTAGON SPIRAL | ||
| 2 3/4" # M182865 |
6 1/2" | |
| 2 3/4" # M1828125 |
12 1/2" | |
| 4 3/4" # M184858 |
5 3/4" | |
This page is now available on our new and improved web site.
Copyright © 1997 - 2003
Bob Sherman
http://www.craftcave.com/candle/canhome.htm