STAR CANDLE MOLDS
- Durable Metal Molds - last a very long time with reasonable care.
- All include: wick holder bar, wick retainer screw, mold sealer, 3 feet of wick, and instructions.
- Made with seam in corner for minimal trimming / polishing.
- Usage Tips:
- Do not drop, pry, scratch or dent.
- Placing in a water bath improves finish on candles.
- Dry thoroughly after use to prevent rusting.
- Spray with silicone before storing to prevent rusting.
- Store in original box, other sealed container, or upside down to keep out dust.
- If candle gets stuck in mold, place in freezer for a few minutes. If it still won't come out, place it in hot water (this ruins finish on candle, and should be considered a last resort). Never try to pry or carve stuck wax from mold - this will almost always ruin the mold.
- Molds may have sharp edges - handle with care.
| POINTS | BASE | HEIGHT |
|---|---|---|
| 5 straight Star Floater No Wick Hole # M412510 |
2 1/2" | 1" |
| 5 straight # M153040 |
3" | 4" |
| 5 straight # M153365 |
3 1/4" | 6 1/2" |
| 5 straight # M1533125 |
3 1/4" | 12 1/2" |
| 5 straight # M155535 |
5 1/2" | 3 1/2" |
| 5 straight rounded star 3 wick holes # M155645 |
6" | 4 1/2" |
| 5 taper # M202565 |
2 1/2" | 6 1/2" |
| 6 taper # MSC412 |
2 3/8" | 6 1/2" |
| 8 straight # MSC333 |
2 3/4" | 6 1/2" |
| 8 straight # MSB333 |
2 3/4" | 9 1/2" |
| 8 straight rounded star # M723035 |
3" | 3 1/2" |
| 8 straight rounded star # M723065 |
3" | 6 1/2" |
| 8 straight rounded star # M723095 |
3" | 9 1/2" |
| 8 straight rounded star # M724045 |
4" | 4 1/2" |
| 8 straight rounded star # M724065 |
4" | 6 1/2" |
| 8 straight rounded star # M724095 |
4" | 9 1/2" |
| 8 taper # MSC414 |
2 3/4" | 6 1/2" |
| 8 taper # MSB414 |
2 3/4" | 9 1/2" |
This page is now available on our new and improved web site.
Copyright © 1997 - 2003
Bob Sherman
http://www.craftcave.com/candle/canhome.htm